Kleen Opener Left and Right Kit contains one left arm and one right arm custom for your dumpster type. Our innovative and easy to use dumpster lid opener is sure to make your trash experience safer, more efficient, more hygienic, and compliant with local codes.
We look forward to growing a relationship with you, your staff, and your business. "Contact Us" for Quote on Quantity Price Breaks.
SANITARY: Prevent lid touching contamination & keep lids properly closed so surrounding areas stay clean & odor free.
SAFETY: Eliminate hand, arm, shoulder, neck & back injury with hands free lid opening technology.
PEST CONTROL: Stop pest infestation, its related mess & spread of disease by keeping lids properly closed.
EFFICIENCY: Reduce labor & increase productivity with the hydraulic assisted lift.
COMPLIANT: Avoid the most common violation & legal risk by keeping the lids closed.
Kleen Opener is your dumpster lid opener solution if your facility, business, job site or residential property has a metal or plastic dumpster. Thanks to the convenient pull down straps & hydraulic assisted arm, users can lift the dumpster lid effortlessly & without the risk of contamination, safely keep the lid open hands free & easily close the dumpster lid after garbage disposal, staying compliant. This revolutionary design is environmentally durable and installs in less than 5 minutes to save you from countless trash related problems.
Key Features & Benefits
Dumpster Body Type refers to the material that the main body (or bin) of your dumpster is made out of.
Your dumpster body will either be made of Metal or Plastic.
#1: Metal Angled is for dumpsters with a metal body, meaning the main structure and walls of the dumpster are made of metal (this is separate from the material of the lid). Additionally, these dumpsters have an angle from the top rail to the inner wall of the dumpster.
To identify the angled top rail, look at either the left side or right side wall of the dumpster from the inside. You will see that the top side rail of the dumpster angles down into the inner wall of the dumpster before the wall runs flat down to the base.
#2: Metal Flat is for dumpsters with a metal body, meaning the main structure and walls of the dumpster are made of metal (this is separate from the material of the lid). Additionally, these dumpsters have a flat inner wall from the top rail. There is NOT an angle from the top rail to the inner wall of this dumpster.
To identify the flat top rail, look at either the left side or right side wall of the dumpster from the inside. You will see that the top side rail of the dumpster runs flat with the inner wall of the dumpster.
#3: Plastic Flat is for dumpsters with a plastic body, meaning the main structure and walls of the dumpster are made of plastic (this is separate from the material of the lid).
The determining factor for this mount is less about what the inner wall of the dumpster looks like (unlike our other mounts) and more about the quality of the plastic. These plastic dumpsters are made more rigid and solid. The side walls tend to run perpendicular to the back wall (where the lid is mounted). The side walls are most likely to remain straight and not bow (as they tend to do for Mount #4). If you have a plastic dumpster with a 5 inch wide top rail then most likely this is your dumpster type.
#4: Plastic Lip is for dumpsters with a plastic body, meaning the main structure and walls of the dumpster are made of plastic (this is separate from the material of the lid). Additionally, these dumpsters have a lip or edge that sticks out on the inner wall.
To identify the lip, look at either the left side or right side wall of the dumpster from the inside. A couple of inches down from the top side rail of the dumpster there is a lip that sticks out, before returning to the flat inner wall. This can be seen in the picture below.
Additionally, these dumpsters are usually made from a more pliable plastic. This can be seen when the side walls bow (curve out) either due to overloading or the elements. Therefore the mounting bracket for this type of dumpster is made with some additional components: the supporting angle bracket and the spacer. These two pieces are necessary for mounting our bracket securely to the plastic top rail and allowing the proper spacing for the arm to open and close without hitting the wall.
Dumpster Lid Material refers to the material that the lid of your dumpster is made of.
Your dumpster lid will either be made of Metal or Plastic.
Most dumpster lids are made of plastic. If yours is made of metal, we may need to send you a Lid Weight measuring kit. This is so that we ensure the Kleen Opener we send you will be able to lift the weight of your lid.
Dumpster Lid Quality is a unique specification that we have worked on over time. It is important information for us because depending on a certain combination of selections, we may need to send you and even more custom product!
Solid Lid: A Solid Lid is one that is more sturdy. You can identify if you have a solid lid by raising the lid from the corner. If the entire lid raises remaining mostly straight and horizontal then it is a solid lid. These lids are not super bendy or flexible.
Flexible Lid: A Flexible Lid is one that is very movable and bendy. You can identify if you have a flexible lid by raising the lid from the corner. The entire lid will not raise. The lid will droop towards the center of the dumpster. These lids are not sturdy.
To measure the length of your lid start with the lid closed. Measure starting from the back hinge of the dumpster. Measure flat down the lid to the front edge. (Measure to the front edge of the lid, not the front edge of the dumpster.)
Measure in INCHES.
First it is important to measure the correct top rail. You will want to measure the top rail of the side wall of your dumpster. (This is where the Kleen Opener will be mounted.) Measure across the top rail as shown in the picture.
Measure in INCHES. Be as accurate as possible.